Table of Contents
Advertisement
Transport the Product
Ensure that the water level is below the MAX indicator on the front panel when
transporting the Product on a cart or in a vehicle. Excess water may flow into the
Product otherwise. Always transport the product in its horizontal position.
Ship the Product
Fluke Calibration recommends that the Product be drained of water before
shipping. To do so, unfasten the drain screw cap on the rear of the Product, and
drain the water by slightly tilting the Product. When shipping the Product, use the
original carton and packing material or Fluke Calibration case accessory part
number 4791304.
Maintenance
This section explains routine operator maintenance necessary to keep the
Product in optimal condition.
Clean the Exterior
To clean the Product, wipe it with a cloth that is lightly dampened with water or
mild detergent. Do not use aromatic hydrocarbons, chlorinated solvents, or
methanol-based fluids. To clean the display, use a soft cloth lightly dampened
with alcohol.
Do not use aromatic hydrocarbons or chlorinated solvents for
cleaning. They can damage the plastic materials used in the
Product.
Caution
RHapid-Cal Humidity Generator
Transport the Product
27
Advertisement
Table of Contents
