Primary Function Buttons - TA DISCOVERY DSC2500 Getting Started Manual

Primary Function Buttons

Use the following buttons for the main functions of the instrument.
Table 1: Primary Function Buttons on the User Interface
Key Name
Start
Stop
Lid Open/Close
Reset
Back
Home
Discovery DSC™ Getting Started Guide
Description
Begins the currently-programmed experiment. This is the same function
as Start on the instrument control software. Start automatically loads
the selected sample pan and closes the furnace, if necessary, before
beginning the experiment.
If an experiment is running, this button ends the method normally, as
though it had run to completion; i.e., the method-end conditions go into
effect and the data that has been generated is saved. This is the same
function as Stop on the instrument control software. If an experiment is
not running (the instrument is in a standby or method-end state), the
Stop button will halt any activity (air cool, all mechanical motion, etc.).
If an Autosampler sequence is in progress, Stop will halt the sequence.
Toggles between opening and closing the lid on the DSC cell.
Returns the Autosampler to the Home position and eliminates all
records of pans.
Returns you to the previous page used
Returns you to the Main screen.
Page 19