Bluetooth-enabled in-dash motorized double-din dvd mp3/cd am/fm receiver with 6.2" widescreen touch screen tft monitor and front panel a/v aux input (25 pages)
Double-din dvd/mp3/cd am/fm receiver featuring 6.2 widescreen touchscreen tft digital monitor with sub and sd memory card port and front aux input (10 pages)
INSTRUCTIONS INSTRUCTIONS SPECIFICATIONS PANEL INTRODUCTION Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption Ground system Negative ground Power Output 80 WattsX4 Channels FM tuner US frequency range 87.5-107.9MHz European frequency range 87.5-108MHz Signal / Noise ratio 55dB Stereo separation 30dB Search station volt...
BASIC FUNCTION WIRING DIAGRAM PWR/VOL button This player is equipped with ISO standard connector, please follow below instruction: Press this button will turn on power, during working longer press this button will turn off Red - ACC ON (+12V) Grey/Grey black - Right front speaker (+/-) ●...
Touch screen Calibration Remote Control Operation Please follow the below instructions to calibrate when there is no touch or 3. SOURCE Button touch is not accurate. Press this button to change mode. Step 1: Press the mode button in the unit to switch to DVD mode. Step 2: Insert a DVD disc, after DVD is loaded, press the stop button “...
Page 6
INSTRUCTIONS INSTRUCTIONS 14. 0-10+ Button 23. ANGLE Button Audio setting 、 Press this button to choose desired song In DVD mode, press this button to change Click icon on setup interface to access audio setting section、preset stations. play angle. interface, as shown in right (PIC 1) diagram: Decimal numbers, for example the 19th You can turn on or turn off the existing functions on audio song, press 10+ and 9 button.
Access setup interface Turn on/off Click [Setting] icon on main interface to access setup interface. When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds, the host will turn off.
Radio Operation Other Operation 1. Enter/exit Rear view function Touch [Radio] icon in the main interface to enter into the radio interface. In any running state, the video signal can switch to reverse video state when reversing Touch icon to return to main interface, and then touch other function icons so as to the car, and the system shall return to its initial running state after reversing the car.
ST. Wheel setting Disc Operation 1. Click on the [ST. Wheel] icon in the main interface into the ST. Wheel settings interface. 1. Play/eject disc Play disc 2. The original vehicle to the control line positive, Insert the disc into the disc slot with the printing surface up, system will detect the disc negative with the machine control line in the and automatically take it in to read and play.
INSTRUCTIONS BT Operation 1. Enter/exit Time setting Touch [B-T] icon in the main interface to enter the BT interface. Touch this button to access time setting interface. Touch icon to exit BT interface. Stereo on/off Touch it so as to turn on/off stereo. 2.
Need help?
Do you have a question about the BV9364B and is the answer not in the manual?
Questions and answers