Initial Message; Initial Conditions Of A Stove - Ravelli Ecotek FLOW LINE Installer Manual

Brochure for models with FLASH motherboard PAGE
( fi rmware version ECT2008air - & ECT2008box - )
4
1. 1. OPERATING CONDITIONS OF A STOvE WITH FIRMWARE ECT2008AIR/BOX

1.1. Initial message

A few seconds after stove is switched ON, the message shown in the following fi gure appears:
-vER. AIR
etC2008 aiR
XX
DataBase xx
ReCeipt xx
Fig.1
-vER. BOX
Fig.2

1.2. Initial conditions of a stove

The starting modes of an Ecoteck stove are:
-cold ignition start(t. smoke<=minimum threshold PR 13)
-hot ignition or "re-ignition " start (t. smoke>minimum threshold PR 13)