1 x Base
08
1 x Front
09
with R &
L doors
Step by step assembly instructions
Step One
Lay parts (02) and (03) on the ground. Please place the parts on a smooth surface, in order not to
scratch the paint.
All fittings (A) must be screwed into into the pre fitted cams on the side panels (02), and (03). Fittings
(B) must be screwed on the side panels (02) and (03) (holes predrilled), by using a screw driver and 4
x screws (C).
_________________________________________________________________________
1 x
10
Fittings Box
4