Opex Falcon+ Operator's Manual page 198

When a job is run that uses ID Assist, the ID Assist indicator LED will be solidly
lit. When ID Assist is triggered, the indicator light will blink, indicating that ID
Assist was activated. Once the item is processed, ID Assist will be disabled.
If you swipe left to right and do not release the item, or if you grab the item from
the conveyor after releasing it, the sensors will time out and the ID Assist
feature will be disabled.
4.3.16.2. ID Assist Functions
ID Assist (and the optional Multi-slot ID Assist) can be used for the following
functions:
Color Dropout Option
an item. The default setting can be used to deactivate any image adjustments
being applied by the Adjust Panel (None, Default, Red, Green or Blue).
Page Rotation Option
cally (None, 0, 90, 180, 270).
Batch Structure Option
on the run screen. The set/transaction boundary trigger will start a new set/
transaction with the item that triggers the sensor (None, New Set, New Trans-
action).
Page Type Requirement
is very useful if you have two page types that are identical in every way or if
there are multiple sets of identical page types. In these cases, the page types
can be set up so that the only way one of the page types will be identified will
be if the operator triggers the Id Assist function. For example, in a job with two
identical documents, a check and a money order page type, the check and
money order can have the same exact attributes with the only distinction being
that money orders must have been triggered by the operator with Id Assist.
That way, the system will recognize the checks the operator scans normally as
belonging to the check page type.
Force as Page Type #
currently set up in your job.
Tag Option allow tagging a piece for back-end processing. No specific action
is taken by the scanner. The tag can contain a text string specified in the job.
The information is included in OXI V1.6 batches and available to transform
profiles. This can be used to pass operator meaningful instructions, such as
Operation
This allows you to trigger a specified color dropout for
Tell the system to rotate the resulting image automati-
Use this trigger instead of the Set/Transaction button
Use the gesture to identify a page type. This function
Use the gesture to force as one of the page types
Falcon+ Operator Manual
OPEX Corporation
99