Table of Contents
Advertisement
IMPORTANT NOTES (field installation only)
For Servicing it is very important that you attached the
registration code sticker on the back of your instrument.
FLUKE
MS 190 software extension
Serial Nr.: SN22222222
Reg.code : RC141414141
For later reference write your Registration Code (RC .....,
included in the sealed envelope), User Code (UC....
received after registration on the internet), and
ScopeMeter serial number (DM....... on the back of your
instrument) in the boxes below.
RC
UC
Instructions for field installation
The Registration document included in the sealed
envelope provides detailed installation instructions. Prior
to installation you must register at our internet site
www.Fluke.com/ScopeMeter.
Requirements:
• Fluke 192/196/199 ScopeMeter with software version
• PC with Windows 95/98 or NT4.0, CD-ROM drive,
• Optically insulated serial cable PM9080/001 as included
DM
MS 190 Package for Field Installation
V03.00 or higher.
Note
Earlier versions of hardware and software can be
upgraded by Fluke authorized service centers.
The service center will ask a fee and will ask you
for the registration number of your MS190 kit.
The upgrade includes a full calibration. Ask your
service center for a quote.
RS232 serial port, and Internet access
with S versions ScopeMeter. It is also available as
separate accessory.
General
1
1-3
Advertisement
Table of Contents
