Safety - Husqvarna LC 247i Operator's Manual

Operations (Noise
Control) Regulation
2017". Noise emission
data can be found on
the machine label and
in the Technical data
chapter.
The product is drip
protected.
Start procedure: push the ON/OFF
button, loosen the start inhibitor, push
the motor brake handle down.
Release the motor
brake handle to stop.
Slow
Fast
Scannable code
Safety definitions
Warnings, cautions and notes
are used to point out specially
important parts of the manual.
WARNING: Used if there
is a risk of injury or death
1199 - 005 - 09.12.2020
Other symbols/decals on
Note:
the product refer to certification
requirements for some markets.
Label on the product
Keep hands and feet away from
the rotating blades.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

for the operator or
bystanders if the
instructions in the
manual are not obeyed.
5