Clock Functions; Clock Functions Table; Setting The Clock Functions; Heat + Hold - John Lewis JLBICO431 User Manual

Clock functions

Clock functions table

Clock function
Minute Minder
Duration
End Time
If you set the time for a clock function, the time
starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the oven turns
off the heating elements after 90 %
of the set time. The oven uses the
residual heat to continue the
cooking process until the time ends
(3 - 20 minutes).
Microwave combi-oven User Manual
Application
To set a countdown (max. 2 h
30 min). This function has no
effect on the operation of the
oven.
Use to turn on the func-
tion. Press or to set
the minutes and to start.
To set how long the oven
works (max. 23 h 59 min).
To set the switch-off time for
a heating function (max. 23 h
59 min).

Setting the clock functions

Before you use the functions:
Duration, End Time, you must set a
heating function and temperature
first. The oven turns off
automatically.
You can use the functions:
Duration and End Time at the same
time if you want to automatically
turn on and turn off the oven on a
given time later.
1. Set a heating function.
2. Press again and again until the display
shows the necessary clock function and the
related symbol.
3. Press or to set the necessary time.
4. Press to confirm.
When the time ends, a signal sounds. The oven
turns off. The display shows a message.
5. Press any symbol to stop the signal.

Heat + Hold

Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared food
warm at 80 °C for 30 minutes. It turns on after
the baking or roasting procedure ends.
You can turn on or turn off the function in the
menu: Basic Settings.
1. Turn on the oven.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the display
shows: Heat + Hold.
19