Table of Contents
Advertisement
Quick Links
Introduction:
This state-of-the-art product has been designed for people who want an engine
immobiliser that does not require a remote control or the need to remember a PIN
number to deactivate. It is best suited to vehicles already fitted with a remote
keyless entry or alarm system, where adding a high security, independent
immobiliser is beneficial. It aims to prevent the theft of your vehicle even if your car
keys with remote attached have been lost or stolen.
This product should be installed in accordance with the wiring methods & principles detailed in
Thank you for purchasing a quality RhinoCo Engine Immobiliser. Please read this manual
carefully before commencing installation and keep it in a safe place for future reference.
FINGERPRINT ENGINE IMMOBILISER
Australian Standard AS 3749.2:1997
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RHINO FPA
Summary of Contents for RHINO FPA
- Page 1 FINGERPRINT ENGINE IMMOBILISER Introduction: This state-of-the-art product has been designed for people who want an engine immobiliser that does not require a remote control or the need to remember a PIN number to deactivate. It is best suited to vehicles already fitted with a remote keyless entry or alarm system, where adding a high security, independent immobiliser is beneficial.
-
Page 2: Table Of Contents
Contents Contents......................................2 Features ......................................2 Arming And Disarming Your Immobiliser ............................. 3 Valet Mode ...................................... 3 How to Enter Your Override PIN Code............................4 How To Change Your Override PIN Code............................4 Learning Procedure For Adding Fingerprints..........................5 Procedure For Deleting All Stored Fingerprints..........................5 Warranty Terms &... -
Page 3: Arming And Disarming Your Immobiliser
Arming And Disarming Your Immobiliser To Arm Your Immobiliser The immobiliser is activated simply by turning the vehicle’s ignition off. The red LED warning light will begin to flash after 10 seconds. To Disarm Your Immobiliser Open and close the driver’s door i.e. enter your car or switch the car’s ignition switch to the accessory position. -
Page 4: How To Enter Your Override Pin Code
How to Enter Your Override PIN Code Note: The factory default PIN Number is 5. To change this number please refer to the Section “How To Change Your Override PIN Code”. In this example the owner has already changed their PIN to 3-7-1-2. -
Page 5: Learning Procedure For Adding Fingerprints
Learning Procedure For Adding Fingerprints Your FPA is capable of storing up to 30 fingerprints in its memory. To add a new fingerprint/s, simply follow the procedure below: 1. Red LED is flashing once per second (system is armed) 2. Now input your override PIN Code. (The default factory pre-set PIN Code is 5) 3. -
Page 6: Warranty Terms & Conditions
Warranty Terms & Conditions RhinoCo Technology (The Company) warrants its products to be in conformance with its own plans and specifications and to be free from defects in materials and workmanship under normal use and service for 12 months from the date stamp control on the product, or for products not having a date stamp, for twelve months from the date of original purchase unless the installation instructions or catalogue sets forth a shorter period, in which case the shorter period shall apply. -
Page 7: Wiring Information
Wiring Information Connector Colour CONNECTION Number 6 Wire Connector Block Not used Blue Not used Green/White Negative Door Switch Input. Most vehicles use negative door switching. If your vehicle uses positive switching, do not use this wire - connect the +ve door switch wire instead. Purple Negative Program Input. -
Page 9: Wiring Diagram
Wiring Diagram...
Need help?
Do you have a question about the FPA and is the answer not in the manual?
Questions and answers