Cpu Installation - Acorp 5VIA73 Manual

CPU Installation

The motherboard provides a ZIF socket 7. The CPU that came with
the motherboard should have a fan attached to it to prevent over-
heating . If this is not the case then purchase a fan before you turn on
your system.
To install a CPU , first turn off your system and remove its cover.
Locate the ZIF socket and open it by first pulling the lever sideways
away from the socket then upwards to a 90-degree right angle. Insert
the CPU with the correct orientation shown . The notched corner
should point towards the end of the lever. Because the CPU has a
corner pin for two of the four corners, the CPU will only fit in the
orientation as shown.
Notch
JP1 CPU Core Voltage Selection (1-5)
Chapter 3 Installation / 17