How To Connect The Speakers; How To Connect To The Sound Source - Bose Companion 2 Series II Owner's Manual

Setting Up
Figure 3
Speaker cable
connection to the
powered speaker
8

How to connect the speakers

The speaker cable is already attached to the accessory speaker.
Insert the connector of that cable into the jack marked TO LEFT
SPEAKER on the rear of the powered speaker (Figure 3).
Powered
speaker
TO LEFT
SPEAKER
RIGHT SPEAKER

How to connect to the sound source

You can connect up to two sound sources to Companion
speakers – for example, your computer as source A and an external
portable audio player as source B.
Note: You can play the second source without missing any
sound alerts from your computer. These speakers can
provide sound from both sources simultaneously.
Two audio input cables are supplied with the speakers. If your
computer has a stereo mini jack, use the cable with a stereo
mini plug. Otherwise, use the cable with RCA plugs on both
ends.
There are two sets of jacks marked AUDIO INPUT on the rear of the
powered speaker. Each set includes a vertical pair of jacks: a white
jack marked L is on top and a red jack marked R is below it.
• Use one of the two sets (L and R) to connect your computer as
source A.
• Use the other set (L and R) to connect an external portable
audio player with an audio output jack, or to connect another
component as source B.
Note: Some portable audio players operate through the com-
puter's sound card, while others have a direct audio output jack.
C onsult the owner's manual for your equipment to familiarize your-
self with how it connects.
Speaker cable
Accessory
speaker
LEFT SPEAKER
®
2