Haier HWM100-FD10829 User Manual page 26

9-Installation
9-3.3
9-3.4
9.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage:
1. Remove the blanking plugs.
2. Remove the back cover.
3. Insert the plastic spacers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.
9-5
25
3. Replace back cover by inserting it in the two gaps
its convexity is facing out (Fig. 9-3.3).
4. Fill left holes with blanking plugs (Fig. 9-3.4).
Note: Keep in safe place
Keep the transportation bolts in a safe place for later
use. Whenever the appliance is to be moved at first
r einstall the bolts.
9.5 Aligning the appliance
Adjust all feet (Fig. 9-5) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and flat as possible.
1. Loose the locknut (1) by using a wrench.
2. Ad
just the high by turning the foot (2).
3. Tighten locknut (1) against the housing.
-