Brother MFC-8880DN User Manual page 139

Error Message
Out of Memory
Print Unable XX
Protected Device
Rename the File
Replace Parts
Drum
Replace Parts
Fuser Unit
Replace Parts
Laser Unit
Replace Parts
PF kit MP
Replace Parts
PF kit 1
128
Cause
The machine's memory is full.
The machine has a mechanical
problem.
The protect switch of the USB
Flash memory drive is on.
There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
The drum unit is the end of its life. Replace the drum unit.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the fuser unit. Call your Brother dealer to replace the fuser
It is time to replace the laser unit. Call your Brother dealer to replace the laser
It is time to replace the paper
feeding kit for the MP tray.
It is time to replace the paper
feeding kit for Tray 1.
Action
Fax sending or copy operation in
progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See
Out of memory message on page 45 or
page 86.)
Print operation in process
Do one of the following:
Reduce print resolution. (See Advanced
tab in the Software User's Guide on the
CD-ROM.)
Clear the faxes from the memory. (See
Out of memory message on page 86.)
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 60 hours
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 130.)
Turn off the protect switch of the USB Flash
memory drive.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
(See Replacing the drum unit on page 149.)
1 Open the front cover, and then press
Clear/Back.
2 Press 1 to reset.
unit.
unit.
Call your Brother dealer to replace the
PF Kit MP.
Call your Brother dealer to replace the
PF Kit 1.