Tektronix TYPE L Instruction Manual page 6

DC and 10 nanoseconds
Table 1-1 summarizes risetim es and frequency
responses available when the L Unit is used
in combination with various types of Tektronix
oscilloscopes.
Vertical Deflection Factors
AC or DC position of AC-DC switch:
to 20 volts per centimeter in nine calibrated
steps; also continuously variable (uncalibrated)
between steps, and up to 50 volts per centimeter.
X10 GAIN AC position of AC-DC switch: 0.005
to 2 volts per centimeter in nine calibrated
steps; also continuously variable (uncalibrated)
between steps, and up to 5 volts per centimeter.
Step Attenuator (V O L T S /C M switch)
Accuracy
Within 3% of front-panel reading for all positions
o f VOLTS/CM switch.
1-2
in X10 GAIN AC.
0.05
Type
and Peak AC Input
600 volts, ac-coupled.
Construction:
Finish:
Weight:
Characteristics Type L Plug-In
Input Impedance Characteristics
Type L Plug-In Unit:
20 picofarads.
Type P6017 Probe:
14 picofarads.
Type P6000 Probe:
11.5 picofarads.
Type P510 Probe: 10 Megohms shunted by
14 picofarads.
P410 Probe: 10 Megohms shunted by
8 picofarads.
M axim um A llow ab le Combined DC
M ech an ical
Aluminum-alloy chassis.
Photoetched, anodized front panel.
Approximately 5 pounds.
1 Megohm shunted by
10 Megohms shunted by
10 Megohms shunted by
AA