TABLE OF CONTENTS
CTIA Requirements .......................................................................................85
Distractions ......................................................................................................86
Product Handling ...........................................................................................87
Electrical Safety ...............................................................................................91
Specifications ...................................................................................95
Support .............................................................................................96
Warranty ........................................................................................... 97
6
GETTING STARTED
INSTALLING A microSDHC™ CARD
Power off your phone before installing or removing the microSDHC card.
1. Place your finger in the slot at the lower left of the
back cover to lift and remove the cover.
2. If the battery is installed already, remove it.
3. Hold your microSDHC card with the metal contacts
facing down and slide it into the microSDHC card slot.
4. Install the battery.
5. Press the cover gently back into place until you hear
a click.
REMOVING THE microSDHC CARD AND
THE nano-SIM CARD
1. With the phone powered off, open the back cover and
remove the battery.
2. Press the soft blocks
1
that keep the cards in place and
2
slide the microSDHC card
or the nano-SIM card
WARNING! Do not remove the cards with sharp objects. You may damage
the card slots and make the phone unable to read the cards or you could hurt
yourself. Press the soft block that keeps the cards in place and slide the nano-
SIM card or the microSDHC card out.
3
out.
7
Need help?
Do you have a question about the Link II and is the answer not in the manual?
Questions and answers
When I open the phone to choose a contact to dial -- Favorites appears instead of my contact list. I have no favorites. I cannot figure out how to get to my contact list.