Makita BFT040F Technical Information page 15

W
iring diagram
1. Wiring on the switch unit (BFT040F, BFT080F, BFT122F, BFT123F)
Top view of switch unit
2. Wiring on the switch (BFT040F, BFT080F, BFT122F, BFT123F)
View from ON/OFF switch side
Endbell lead
wire (black)
Controller lead
wire (blue)
Controller lead
wire (white)
Hold the controller lead
wire (white) with lead holder.
Switch unit
Pin
Clutch case
Pass the lead wires, covered by shrink tube,
through the pin.
And hold them with lead holders at clutch case.
Switch unit
Lead holder
Micro
switch side
Lead holder
View from micro switch side
Contain the slack portion
of lead wires and connectors
into this pace.
ON/OFF
switch side
Endbell lead
wire (red)
Controller lead
wire (purple)
Micro switch
Controller lead
wire (orange)
Controller lead
wire (white)
P 15 / 15