Table of Contents
Advertisement
Convenient Usage
Reducing Print Preparation Time and Media Consumption
Media Records Register/Retrieve function overview
By using Media Records Register/Retrieve function, it can shorten the adjustment time
because the media feed and drop position adjustments can be omitted when you use the
same media again.
For how to use the Media Records Register/Retrieve function, refer to "
Using Function of Media Records Register/Retrieve" in the "Operating Instructions".
For how to register or change the registered name of the Media Record, refer to
"Registering or Changing the Registration Name of the Media Record" in the "Operating
Instructions".
▪
Abnormal images may occur depending on the production lots of the media and the
environment.
▪
If it occurs, perform the feed quantity adjustment and drop position adjustment
again.
Roll to Cut function
It can be used as Roll to Cut mode by changing the RIP settings.
Media is wasted at each cut approximately 770 mm (30.3 inches), when default setting.
In order to prevent the abnormal image by the media deformation, the default setting is not
to rewind the media.
However, if you want to reduce the lost media, turn on the "Auto Rewind after Auto Cut". It
can reduce up to 600 mm (23.6 inches) of waste media for each cut.
Caution
Depending on the media, the image quality may be significantly degraded due to the
deformation of the media due to heat, so please test with the media in advance.
42
Advertisement
Table of Contents
