Added Alert Message Of Intermittent Printing; Descriptions And Actions For Intermittent Printing - Ricoh Pro L5130 Manual

Added Alert Message of Intermittent Printing

Added Alert Message of Intermittent
Printing

Descriptions and Actions for Intermittent Printing

[Overview]
This printer is recommended for use in Gigabit Ethernet network.
If the network environment or RIP PC performance is poor, data transfer to the printer may
be delayed, resulting in "Intermittent Printing"
printing speed may decrease, and image quality may defect such as unstable color due to
fluctuations in drying time.
Therefore, the new alert message has been added to inform the operators that the current
printing behavior is in "Intermittent Printing".
(*1): The behavior in which the head carriage waits for a few seconds or minutes at the left
and right edges of the printer during printing.
[How to operate]
⚫
Select ON/OFF for this alert message
Usually, "ON" should be selected to use the printer. If alert messages are displayed
frequently and you cannot improve your network or PC environment immediately, stop
printing and temporarily turn OFF this alert message by following the steps below.
Then, after improving the environment, turn it back ON again.
1. Press [User Tools] key on the control panel.
2. Press [Display Print Settings].
3. Press [Display Print Warning Speed].
[ON]: Show alert message of Intermittent Printing (Default)
[OFF]: Do not show alert message of Intermittent Printing
(*1)
. If you continue to print in this behavior, the
8