General Safety Rules; Work Area; Electrical Safety - Flexlite 3H User Manual

SYMBOLS
Some of the following symbols may be used on this work light. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to operate the work light better and safer.
SYMBOL
Volts
V
Amperes
A
Hertz
Hz
Watt
W
Minutes
min
Alternating Current
Direct Current
Class II Construction
Safety Alert
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER :
WARNING :
CAUTION :
CAUTION :

GENERAL SAFETY RULES

WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS

WORK AREA

 Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
 Working temperature. This work light is designed to
be used at normal room temperature. If used under 0°C
(32°F) the battery will deplete faster. If used over 45°C
(113°F) an automatic cut-off will turn the light off until
the temperature of the light head comes down.
Depending if the work area is well ventilated or not,
the cut-off temperature can be affected (see features for
more information).
 FLEXLITE is designed to be used in industrial
environments under rain, snow and dust. But
FLEXLITE products cannot be immersed in water. If
the working area is moist and dusty, some particles
NAME
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Double-insulated construction
Precautions that involve your safety.
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
DESIGNATION/EXPLANATION
MEANING
will stick to the fan or heat sink and reduce
performance. See maintenance section to remove any
dirt.
DANGER!
Never connect / disconnect or use an external power
supply or charger in hazardous areas.
DANGER!
Never connect or disconnect the connector on the
light head or any extension cord when the power is on
or in hazardous areas.

ELECTRICAL SAFETY

 A battery operated work light with integral
2