Viavi T-BERD 5800 Quick Card page 3

Run Test:
1. Select the CPRI Rate to test.
2. Verify that Signal Present, Sync Acquired,
and Frame Sync LEDs are all green.
• If any of the lights are red in color, the RRU
may need to be reset or power may need to
be cycled.
•
If the Frame sync is red, the SFP may not be in
working order or it may not be fast enough for
the Rate of CPRI selected.
3. Press
CPRI Tests screen.
4. Tap
5. At the end of the test duration, Pass/Fail
status for each scheduled test will be
indicated by green checkmark,
x, . Tests for which no pass/fail
threshold was specified will have a blue
checkmark,
6.
Tap the
results. Tap
screen.
7. Press
Report Info screen.
Save Report:
1. Enter Customer name, Technician ID, and
other desired header information for the
report.
2. Tap
Report screen.
3. Enter a File Name and tap
4. After viewing the report, tap
Contact Us +1 844 GO VIAVI
(+1 844 468 4284)
to proceed to the Run
to start the test.
, or red
.
symbols to view detailed
to return to the Tests
twice to proceed to the
to proceed to the Create
.
.
To reach the VIAVI office nearest you,
visit viavisolutions.com/contacts.
Figure 6:Local SFP Verification
Figure 7: Run CPRI Tests screen
Figure 8: Create Report
© 2018 VIAVI Solutions Inc.
Product specifications and descriptions in this
document are subject to change without notice.
VIAVI Solutions