Connect to Fiber Under Test:
1. Insert C37.94 optics into the Port 1
SFP/SFP+ slot on the top of the
T-BERD/MTS.
2.
After inspecting the fiber end faces, connect
the C37.94 optics to the fiber under test
using an LC-LC jumper cable.
Launch and Configure Test:
1. Press the Power button
the test set.
2. Press the Test icon
the screen.
3. Using the Select Test menu, Quick Launch
menu, or Job Manager, launch the C37.94
BERT►P1 Terminate test.
4. Tap
to open the Tools Panel and
select
5. Press
to continue.
6. Press the Setup Soft Key,
top right side of the screen.
to turn on
at the top of
.
, on the
Figure 3: T-BERD/MTS 5800v2 Dual Port mainframe
Figure 4: Launch Screen
Figure 5: Tools Panel
VIAVI Solutions