Cleaning The Scanner Glass - Brother MFC-250C User Manual

d
Wipe the inside and outside of the paper
tray with a soft cloth to remove dust.
e
Close the paper tray cover and put the
paper tray firmly back in the machine.
Troubleshooting and Routine Maintenance

Cleaning the scanner glass

a
Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
1
2
b
(MFC-290C and MFC-297C only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a soft lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
Note
In addition to cleaning the scanner glass
and glass strip with a non-flammable glass
cleaner, run your finger tip over the
scanner glass and glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the scanner glass and glass
strip again concentrating on that area. You
may need to repeat the cleaning process
three or four times. To test, make a copy
after each cleaning attempt.
B
3
B
103