Brother MFC-250C User Manual page 53

Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is
Remote Deactivation Code is # 5 1. If you
want to, you can replace them with your own
codes.
a
Press Menu, 2, 1, 4.
1.Setup Receive
4.Remote Codes
b
Press a or b to choose On (or Off).
Press OK.
c
Enter the new Remote Activation Code.
Press OK.
d
Enter the new Remote Deactivation
Code.
Press OK.
e
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, ,
#.
• Remote Codes might not work with some
telephone systems.
7
5 1. The preset
Telephone and External devices
7
43