Brother MFC-250C User Manual page 109

Note
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head has stopped in the right
corner as shown in the illustration, you
cannot move the print head. Hold down
Stop/Exit until the print head moves to the
middle. Then unplug the machine from the
power source, and take out the paper.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
Troubleshooting and Routine Maintenance
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
2
h
Push the paper tray firmly back into the
machine. While holding the paper tray in
place, pull out the paper support until it
clicks and unfold the paper support flap.
Note
Make sure you pull out the paper support
until it clicks.
1
3
B
99