Instructions To Replace Electronic Thermostat - Hoshizaki RM-49 Service Manual

DISCONNECT UNIT FROM POWER SUPPLY BEFORE DOING ANY SERVICE
1. Remove the front
frame of the
thermostat using
your fingers.
Instructions to Replace The Electronic Thermostat.
2. Turn 90° both screws to
loosen their cams and the
front panel will detach .
Then, proceed to remove
the thermostat from the
panel, by keeping it
horizontally.
3. Disconnect the
connectors located in
the back of
thermostat. .
4. To install the new
electronic thermostat
reverse the previous
steps.