Installation; Mounting Orientation - HOBBYEAGLE A3 PRO V2 User Manual

INSTALLATION

NOTES
 Never use the hot-melt glue or nylon ties to fix the gyro onto the airplane!
 You need only one piece of the tapes each time, a soft or thick mounting may probably impact
the performance of the gyro.
 The gyro is a sensing device, please make enough space around it and keep as far away from
other electronic devices or wires as possible.

Mounting Orientation

Use one of the supplied double-sided tape to attach the gyro to your airplane firmly. For best performance,
the gyro should be mounted as close to the C.G. as possible, and the housing edges must be aligned
exactly parallel to all three rotation axes of the plane. The gyro can be attached flat or upright, and even
upside down, however, you have to ensure the arrow on the sticker always point to the heading direction,
otherwise the gyro will not work normally in ANGLE, LEVEL and HOVER modes.
① Flat, face up
③ Upright, button up
WWW.HOBBYEAGLE.COM
② Flat, face down
④ Upright Inverted, button down
2 / 15