Troubleshooting; Repairs - Spare Parts; Disassembling Of The Machine - Lavor INDEPENDENT 1900 Manual

Hide thumbs Also See for INDEPENDENT 1900:

Manual (76 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

Table of Contents

Available languages

TROUBLESHOOTING

Motor: see "owner's manual - general gasoline engine".

High-pressure water pump:

FAULT

The pump doesn't

reach the necessary

pressure

Fluctuating pressure

Water leaking from

the pump

Loss of pressure

Noise

Water is in the oil

Water leakage from

the head

Lance blocked

REPAIRS - SPARE PARTS

For any further inconveniences, not mentioned in this booklet or any demages of the machine,

we suggest you to go to an Authorized Assistance center for the repair or possible replacement

of any original spare parts.

DISASSEMBLING OF THE MACHINE

When you decide not to use the machine, we recommend the following:

- Place it out of the reach of children;

- Do not use the disassembled parts of the machine as spare parts;

- Disassemble the machine for spare parts disposal according to the law in force.

CAUSE

Water inlet fi lter is clogged

Suction/delivery valves are

clogged or worn out

Lance nozzle incorrect or worn

out

Air intake

Valves dirty, worn out or stuck

Sealing worn out

The nozzle is worn out

The valves are dirty or blocked

Adjusting valve seal is worn out

Seals are worn out

The fi lter is dirty

Air intake

Valves are worn out dirty or

blocked

Bearings are worn out

Extreme water temperature

The fi lter is dirty

O-rings (water and oil) are worn

out.

High moisture in the air

Seals are worn out

O-rings seal system are worn out

Nozzle is dirty

REPAIR

Clean the water inlet fi lter