Adjusting The Image Size And Position; Enlarging/Reducing An Image; Rotating An Image - Sony DPF-V1000 Operating Instructions Manual

Adjusting the image size
and position

Enlarging/reducing an image

You can enlarge or reduce an image in single
view mode.
1
To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
Each press of the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
About crop and save
• The screen currently displayed is saved as it
was trimmed after you press B/b/v/V to
move the enlarged image and then press the
MENU button.
• You can select [Save as new image] or
[Overwrite] by pressing the MENU button
when the image is enlarged or reduced. Press
v/V to select the method used to save the
image.
• If you select [Save as new image], the image
is saved as a new image.
• If you select [Overwrite], the image is
overwritten. A confirmation screen is
displayed when you select [Overwrite]. Go
to step 4 on page 46.
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• It is not possible to enlarge an image using the
buttons on the photo frame.
button enlarges the

Rotating an image

Press ROTATE ( ) on the remote
control.
Each press of the button rotates the image 90
degrees counter-clockwise.
Operate from the menu of the
photo frame
1
Press MENU in single display mode.
The menu is displayed.
2
Press B/b to select the
tab.
The screen used for editing is displayed.
3
Press v/V to select [Rotate] and
then press .
The Rotate menu is displayed.
4
Press v/V to select the direction to
rotate and then press
• :
Rotates the image 90 degrees
clockwise.
• :
Rotates the image 90 degrees counter-
clockwise.
5
Press v/V to select [OK] and then
press .
Note
An enlarged image cannot be rotated.
(Editing)
.
Continued
GB
47