Notes On Using A Memory Card - Sony DPF-V1000 Operating Instructions Manual

Digital photo frame 10.2" lcd w/ hdmi output
Hide thumbs Also See for DPF-V1000:
Table of Contents

Advertisement

• CompactFlash Memory Card (Type I/
Type II) and CF+Card (Type I/Type II)-
compatible CompactFlash Card
• Microdrive
You can also use the Smart Media card by
using a commercially available CompactFlash
*7
card adaptor
.
However, we do not guarantee proper
operations for all types of CompactFlash cards.
*6
Use a CompactFlash card with a power
specification of 3.3V or 3.3V/5V. You cannot use
a type for 3V or 5V only. Do not insert other types
of CompactFlash card into the photo frame's
insertion slot. The photo frame may be damaged.
The photo frame has been demonstrated as
operable with a CompactFlash with a capacity of
32 GB or smaller.
*7
When using a commercially available
CompactFlash card adaptor, refer to the operating
instructions of the adaptor you use for how to
install the card and adaptor. When using a
CompactFlash card adaptor, a write-protected card
may not work properly.

Notes on using a memory card

• When using a card, make sure to check the
correct insertion direction of the card and the
correct insertion slot.
• When inserting the memory card, it will only
insert part of the way, so do not try to force
it, as this could damage the memory card
and/or photo frame.
• Do not remove a card or turn off the photo
frame while the photo frame is reading or
writing data, or the access indicator is
flashing. Otherwise, data may be rendered
unreadable or be erased.
• We recommend that you save a backup of
important data.
• Data processed with the computer may not
be displayed with the photo frame.
• When you carry or store a card, put it in the
case supplied with it.
• Do not touch the terminal of a card with your
hand or a metal object.
• Do not strike, bend or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
*6
• Do not use or store a card under the
following conditions:
– Locations beyond the required operational
– Humid locations or locations with
– Locations subject to static electricity or
conditions including locations such as the
hot interior of a car parked in the sun and/
or in the summer, the outdoors exposed to
direct sunlight, or a place near a heater.
corrosive substances present
electrical noise
GB
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpf-x1000Dpf-v800Dpf-x800

Table of Contents