Specifying The Playback Device; Adjusting The Image Size And Position; Enlarging/Reducing An Image - Sony S-Frame DPF-D82 Operating Instructions Manual

Specifying the playback
device
You can specify the memory card or external
device to be displayed.
1
Press MENU.
The menu is displayed.
2
Press B/b to select the
device) tab.
The screen used for selecting a device is
displayed.
Tip
Insert the device at this point during the
procedure if the device you want to use cannot
be selected.
3
Press v/V to select the device you
want to display and then press
The images of the selected device are
displayed.
Tips
• You can also use the MENU button on the photo
frame.
• The search is cancelled automatically when you
change the playback device during a search.
GB
40
Adjusting the image size
and position

Enlarging/reducing an image

You can enlarge or reduce an image in single
view mode.
1
To enlarge an image, press
(Select
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
Each press of the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
About crop and save
• The screen currently displayed is saved as it
was trimmed after you press B/b/v/V to
move the enlarged image and then press the
MENU button.
• You can select [Save as new image] or
[Overwrite] by pressing the MENU button
when the image is enlarged or reduced. Press
v/V to select the method used to save the
image.
.
• If you select [Save as new image], the image
is saved as a new image.
• If you select [Overwrite], the image is
overwritten. A confirmation screen is
displayed when you select [Overwrite]. Press
v/V to select [Yes] and then press
save the image. Press
confirmation screen is displayed after saving
is finished.
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• It is not possible to enlarge an image using the
buttons on the photo frame.
button enlarges the
to
again when the