Inserting A Memory Card - Sony DPF-V1000 Operating Instructions Manual

Inserting a memory card

Insert the memory card firmly into the
corresponding slot with its label side
facing toward you (when you are facing
the back side of the photo frame).
The access lamp flashes when the memory card
is inserted correctly. Reinsert the memory card
after checking the label side of the memory
card if the access lamp does not flash.
Attach the slot cover supplied with this photo
frame when you insert the memory card and
leave it inserted for a long time.
For details on the memory cards you can use
with this photo frame, see pages 79 to 81.
Insert the memory card firmly into the
corresponding slot with its label side facing
toward you. The slot order from the top is
"Memory Stick" ("Memory Stick Duo"),
CompactFlash card, SD memory card and xD-
Picture Card.
Access lamp
To remove a memory card
Remove the memory card from its slot in the
opposite direction from which it was inserted.
Notes
• When inserting the memory card, it will only insert
part of the way, so do not try to force it as this could
damage the memory card and/or photo frame.
• This photo frame has a slot that is both a "Memory
Stick" standard and Duo size compatible slot, so
you do not need a "Memory Stick" adaptor.
• The SD memory card/xD-Picture Card dual-
purpose slot automatically detects the card type.
• Before using a memory card, see "About memory
cards" on page 79.
Continued
GB
25