Olympus DS-9500 Administration Manual page 18

Wireless Download
Enable wireless download to folder
Select this check box to enable the wireless download feature.
Address
Type the IP address of the computer running Wireless Communication Service.
Port
Type the port number used by Wireless Communication Service.
Download Path List
In this list, set destination folders to download dictation files for each device folder.
Select an item in this list, and then click the Browse button
the destination path, and then click OK.
You must specify a shared folder on the network as the destination folder in UNC
format.
If the DS-9500 (Ver. 1.13 or later) is connected to DM/TM via USB and
communication with WCS is enabled, the dictation files are transferred to the
specified network folder and dictation status is managed in the same way as during
Wi-Fi transfer.
If the Advanced Download feature of Wireless Communication Service is enabled,
download paths set on the recorder are ignored.
Refer to chapter 4, "Advanced Download".
. In the Download Path dialog box, select