Dexter Laundry 20VCIS2 Manual page 357

FR FR
2. SAFETY INSTRUCTIONS
ES ES
workpiece.
PT PT
D. Never hold the workpiece in your hands or across your leg
IT IT
while cutting. Secure the workpiece to a stable platform. It is
important to support the work properly to minimise body exposure,
EL EL
blade binding, or loss of control.
E. Hold the power tool by insulated gripping surfaces, when
PL PL
performing an operation where the cutting tool may contact
hidden wiring. Contact with a ''live'' wire will also make exposed
RU RU
metal parts of the power tool ''live'' and could give the operator an
electric shock.
KZ UA
F. When ripping, always use a rip fence or straight edge guide. This
KZ UA
improves the accuracy of cut and reduces the chance of blade binding.
G. Always use blades with correct size and shape (diamond versus
RO RO
round) of arbour holes. Blades that do not match the mounting
hardware of the saw will run off-centre, causing loss of control.
BR BR
H. Never use damaged or incorrect blade washers or bolt. The blade
washers and bolt were specially designed for your saw, for optimum
EN
EN
performance and safety of operation.
KICKBACK CAUSES AND RELATED WARNINGS
. Kickback is a sudden reaction to a pinched, jammed or misaligned saw
blade, causing an uncontrolled saw to lift up and out of the workpiece
toward the operator;
. When the blade is pinched or jammed tightly by the kerf closing down,
the blade stalls and the motor reaction drives the unit rapidly back
toward the operator;
. If the blade becomes twisted or misaligned in the cut, the teeth at the
back edge of the blade can dig into the top surface of the wood causing
356
FURTHER SAFETY INSTRUCTIONS FOR ALL SAWS