Britax Safe-n-Sound GLIDE LITE LX5012 Series Manual page 14

SECURING YOUR CHILD HARNESS
• ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS.
• THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD.
• NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN
THE STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY
POSE A STRANGULATION HAZARD.
• WHEN HARNESS IS NOT IN USE, DISCONNECT SHOULDER STRAPS FROM
THE WAIST STRAPS AND BUCKLE TO PREVENT STRANGULATION.
• A five point harness is provided to restrain your child.
• Buckle tongues separate for added safety.
• To reconnect buckle tongues and to secure the child in the harness please
follow the steps below carefully.
PLEASE NOTE
Each waist buckle tongue has a raised rib on one side and can only be locked into the buckle
assembly with the raised rib facing up. Ensure the harness straps are not twisted as they may
become uncomfortable for the child.
Always apply the brakes before placing child in stroller seat. Position the shoulder strap near
the child's shoulder and position crotch strap between legs.
A
A
BUCKLE
HOUSING
WAIST
STRAP
B
CROTCH STRAP
A Position the shoulder strap tongue (A) on
top of the waist buckle tongue (B) on both
sides.
USE THE HARNESS AT ALL TIMES.
14
Instructions for Assembly, Operation and Maintenance
A
C
WAIST
WAIST
STRAP
STRAP
B
B Push both buckle tongues (A + B) into the
buckle housing (C) until the buckle tongues
lock into position.
B
SHOULDER
STRAP
BUCKLE
HOUSING
C
A B
CROTCH STRAP
SHOULDER
STRAP
WAIST
A B
STRAP