Britax Safe-n-Sound GLIDE LITE LX5012 Series Manual page 21

Ultra lightweight stroller
Hide thumbs Also See for Safe-n-Sound GLIDE LITE LX5012 Series:
Table of Contents

Advertisement

CLEANING
FABRICS
Removable fabrics may be cleaned using lukewarm water and soap or mild detergent.
Rinse thoroughly and allow to dry away from direct sunlight.
Non-removable fabrics can be spot cleaned using a damp sponge and soap or mild
detergent. Allow to dry completely before re-use or storage.
Never use bleach, or abrasive cleaning products.
DO NOT iron or dry clean.
NOTE: DO NOT place any of the stroller fabrics in the dryer.
Allow to dry naturally, away from direct sunlight.
FRAME
Remove dirt and dust away from any moving mechanism.
Clean frame with a soft damp cloth and soap or mild detergent and allow to dry
thoroughly.
DO NOT use abrasive cleaning products as it may cause stains, discolouration or
scratches to the frame.
DO NOT soak or submerge frame in water.
DO NOT remove, dismantle or alter any part of the stroller mechanism or brakes.
LEATHERETTE
Spot clean with a damp soft cloth.
DO NOT use a dripping wet cloth or wet the leatherette excessively.
WHEELS
Remove wheels from stroller.
Clean with damp cloth and soap or mild detergent. Use brush to remove dirt and
mud build up around the tyre. Allow to dry thoroughly before placing wheels back on
the frame.
If necessary lubricate wheel shaft with a small amount of lubricant before placing into
the stroller.
Ensure the stroller is cleaned thoroughly after using it on the beach as sand and salt can
damage stroller mechanism, wheel assembly, causing premature wear and corrosion.
PLEASE NOTE
Our product warranty does not cover any rust to the rivets or screws, if you are caught in the
rain or at the beach always thoroughly dry the frame to avoid any rust damage.
Instructions for Assembly, Operation and Maintenance
21

Advertisement

Table of Contents
loading

Table of Contents