Advertisement
Available languages
Available languages
COMBINATION BENCH GRINDER
WARNING
Read this manual carefully before using the machine, for your own safety.
SAFETY INSTRUCTIONS
When using the machine, always observe the enclosed safety instructions as well as the additional safety instructions.
The following symbols are used throughout this manual:
ADDITIONAL SAFETY INSTRUCTIONS FOR BENCH GRINDERS
Always wear safety goggles while grinding.
•
Keep children out of the work area.
•
•
Never operate the grinder without the wheel guard in place.
Always securely fix the workpiece support.
•
•
The distance between the spark guard and the grinding wheel must not exceed 2 mm.
•
The distance between the workpiece support and the grinding wheel must not exceed 2 mm.
•
Never use damaged grinding wheels.
Replace the grinding wheel when it has worn by more than approx. 40 mm.
•
ELECTRICAL SAFETY
DESCRIPTION
Your combination bench grinder has been designed for sharpening metal and wooden tools, including knives, chisels and
other cutting tools.
1 On/off switch
2 Workpiece support grinding wheel
3 Grinding wheel
4 Transparent screen
5 Spark guard
6 Grinding belt
7 Workpiece support grinding belt
8 Mounting hole
Mounting the machine
The machine must be screwed to a workbench.
• Mark the position of the mounting holes (8) on the workbench.
• Drill holes at each of the marked positions, adjusting the diameter and depth of the holes to the screws used.
Place the machine on the workbench and insert the screws into the mounting holes.
• Firmly tighten the screws.
10
Denotes risk of personal injury
or
Damage to the tool.
Always check that the power
supply corresponds to the
Voltage on the rating plate.
www.BormannTools.com
GB
Advertisement
