Vuly THUNDER PRO Manual page 14

5.0 Installation
VULY Thunder Pro
STEP 1
Check that your trampoline bundle contains all of following parts:
1. Leaf Springs 2. Upper Net Poles
4. Upper Frame Tubes 5. Middle Net Poles
7. Lower Frame Tubes 8. Lower Net Poles
10. Spring Tool 11. Jump Mat
5.3 Pre-assembly
● Find level ground, and make sure that there are no
obstructions nearby.
● Check that you have all the parts required for assembly.
REMEMBER: WEAR THE VULY GLOVES AT ALL TIMES WHEN
INSTALLING YOUR TRAMPOLINE!
Keep the Leaf Spring sleeves on during assembly and over the life
of your trampoline. These sleeves provide crucial protection in the
unlikely event of a Leaf Spring breaking.
26 | Vuly Thunder Pro
TIME REQUIRED FOR ASSEMBLY: 1-2 HOUR (APPROX)
NUMBER OF PEOPLE REQUIRED FOR ASSEMBLY: 2
3. Safety Rings
6. Safety Net and
Safety Skirt
9. Joiner Poles
12. Frame Reinforcements
Installation can be made easier if you
watch the corresponding VULY video in
addition to this manual.
You will be forwarded to YouTube.
Youtube Channel: VULY PLAY
5.0 Installation
5.4 Assembling the trampoline
STEP 1
A.
Connect each Lower Frame Tube A to a Lower Frame Tube B.
Lower Frame Tubes are those with Leaf Spring holes.
B.
Connect each Upper Frame Tube A to an Upper Frame Tube B.
Ensure that the push buttons lock these components together.
WARNING:Ensurethatallpushbuttonsarefirmlysecuredand
protruding from the Frame Tubes. A great deal of force is placed
on these components; push buttons that are not fully locked may
cause damage and injury.
STEP 2
A.
Lay out each Lower Frame Tube in a circle, ensuring that the
Leaf Spring holes are facing upwards. Place the
Upper Frame Tubes around them. Ensure that all drainage
holes are facing downwards.
B.
Position a Joiner Pole and two Leaf Springs in the gaps around
the Frame Tubes.
A
B
Vuly Thunder Pro | 27