Removing The Backlight Bulbs - Compaq TFT8000 Maintenance & Service Manual
Flat panel monitor
Hide thumbs
Also See for TFT8000:
- Hardware reference manual (64 pages) ,
- Configuration (35 pages) ,
- User manual (27 pages)
Table of Contents
Advertisement
1.5.6 Removing the Backlight Bulbs
1. After the removal of the back cover and the backlight shields 1, remove the
two screws 2 that secure the backlight bulbs (Spare part no. 307919-001).
2. Disconnect the backlight cables 3 from the inverter board.
3. Slide the backlight bulbs out of the LCD panel 4.
Removing the Backlight Bulbs
1-10
Removal and Replacement Procedures
The backlight shields came off during the removal of the back cover.
If you are replacing the backlight bulbs, slide the new bulbs in and reverse the
procedure.
Advertisement
Table of Contents
