Preface; Technician Notes; System Serial Number - Compaq TFT8000 Maintenance & Service Manual

preface

This Maintenance & Service Guide is a troubleshooting guide that can be used for reference when
servicing the Compaq TFT8000 Flat Panel Monitor. Only authorized technicians trained by
Compaq should attempt to repair this equipment.
Compaq Computer Corporation reserves the right to make changes to the Compaq TFT8000 Flat
Panel Monitor without notice.
Symbols and Conventions
The following words and symbols mark special messages throughout this guide:
WARNING: Text set off in this manner indicates that failure to follow directions in the
!
warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of data.
Text set off in this manner presents commentary, sidelights, clarifying information, or
specific instructions.

Technician Notes

WARNING: Only authorized technicians trained by Compaq should attempt to repair this
!
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module level repair. Because of the complexity of the individual
components and subassemblies, no one should attempt to make repairs at the component
level or to make modifications to any printed wiring board. Improper repairs can create
a safety hazard. Any indications of component replacement or printed wiring board
modifications may void any warranty.
CAUTION: To properly ventilate your monitor, you must provide at least 3 inches (7.6
cm) of clearance at the back of the monitor.
CAUTION: The monitor is designed to be electrically grounded. To ensure proper
operation, plug the AC power cord into a properly grounded AC outlet only.

System Serial Number

The serial number is displayed on the monitor's back panel.
Preface v