Disconnecting The Video Connector; Separating The Monitor Base From The Monitor Panel - Compaq TFT8000 Maintenance & Service Manual
Flat panel monitor
Hide thumbs
Also See for TFT8000:
- Hardware reference manual (64 pages) ,
- Configuration (35 pages) ,
- User manual (27 pages)
Table of Contents
Advertisement
1.5.2
Disconnecting the Video Connector
Disconnect the video connector from the monitor panel.
Disconnecting the Video Connector from the Monitor
1.5.3
Separating the Monitor Base from the Monitor Panel
1. Lay the front bezel on a soft area to prevent it from getting scratched, defaced, or broken.
2. Grasp the hinge cover 1 and press it in on both sides. Then, lift up and pull off the hinge
cover. (Spare part nos. 307916-001/Opal, 307916-002/Carbon).
3. Remove the two screws 2 as shown below.
Removing the Hinge Cover
1-6
Removal and Replacement Procedures
Advertisement
Table of Contents
