1.5.4
Replacing the Backlights
1. Use a screwdriver to pry out the two rubber tabs 1 on the back cover.
2. Remove the two screws 2 from the back cover.
Removing the Two Screws from the Back Cover
3. Turn the monitor over so that the front bezel is facing up.
4. Use Tool No. 107823-001 to gently pry open all four sides of the monitor panel. Use the
same tool to separate the tabs 1 on the monitor panel. There are two tabs on each side.
5. Lift the front bezel 2 up and away from the monitor panel.
Removing the Front Bezel Assembly
1-8
Removal and Replacement Procedures