Advertisement
Brother DR-250 Technical Instruction
Remanufacturing the Brother DR-250
This new family of multifunction
machines was released to replace the
now discontinued Brother HL 720. Like
the HL720, these of machines use sepa-
rate drum and toner units. Similar look-
ing in appearance to the DR200, the new
DR-250 uses different drum gears and
employs molding differences in the car-
tridge prevents the cartridges from
being interchangeable.
However, the same problems that
haunt the DR-200 also plague the DR-250.
Future Graphics (FG) is a distributor of compatible replacement parts and products for imagining equipment.
None of FG's products are genuine OEM replacement parts and no affiliation or sponsorship is to be implied between FG and any OEM.
Streaking caused by worn developer
rollers is a common problem with these
drum units. Careful visual inspection of
the developer roller is important to pro-
ducing a quality product.
As with most new releases, an
improvement to the engines perform-
ance was accomplished by increasing
the printers speed to 10 pages per
minute while maintaining the same 600
x 600dpi print resolution.
9
DR-250
Advertisement
