Advertisement
2
Photo 6
Need trustworthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
Photo 4
Photo 5
Photo 7
Photo 8
Photo 9
Brother DR-250 Technical Instructions
Step 3
Step 3: Using a small flat blade screwdriv-
er, release the two locking clips on the
back of the cartridge. (See Photo 4)
Step 4
Next to the locking tabs located on the
top of the cartridge there are two slots
were you can see the metal toner filling
cover. Using a screwdriver push the cover
down (towards the drum) till the guide
tab is exposed.
(See Photo 5)
Step 5
Release the locking tabs on both sides of
the cartridge.
(See Photo 6 & 7)
Step 6
Using a flat blade screwdriver release
the two locking tabs from the top of the
cartridge.
(See Photo 8)
Step 7
Step 7: Release the three locking tabs
from the front of the cartridge.
(See Photo 9)
Advertisement
