Garland CEPA 130 SBW Instruction Manual page 27

- Recharge the battery at temperatures between 5º
and 40º C.
- Always keep the battery away from water, wet areas,
sources of heat and chemicals.
5.3. INSTALL THE BATTERY
Install the battery by
sliding it along the
rails until it is securely
connected to the
machine.
To remove the battery,
press the tab and pull
the battery out.
6. USING THE MACHINE
Use this machine only for the uses for which it
was designed. The use of this scissor for any other
use is dangerous and may cause damage to the user
and / or the machine.
Only cut wood branches. Do not use this machine
for any other purposes not intended. For example:
do not use this machine to cut plastic, brick or metal
materials. Using this machine for operations other
than those intended may cause dangerous situations.
If you slip or lose balance or fall immediately release
the trigger.
Do not rely solely on the safety features of this
machine.
Do not use this machine if you are fatigued, ill, have
taken medicine, narcotic drugs or alcohol.
Do not expose this machine to rain or wet conditions.
Water entering this machine will increase the risk of
electric shock.
Do not use this machine at night, in fog or with
reduced visibility that does not allow you to clearly see
the work area.
Lack of rest and fatigue can lead to accidents or
damage.
Never leave this machine unattended.
Do not allow anyone to enter the work perimeter.
This working perimeter must be 1.5 meters and it is a
dangerous area.
Never use the scissors when you are on a ladder, in a
tree, or in any other unstable place.
If you cut a branch that is under tension, be aware of
the possible rebound of the branch when making the
cut.
If you start to cut a branch and you notice that the
scissors are not able to cut it because it is very hard
and / or large, release the trigger so that the scissors
open. Do not force the scissors to try to cut it.
27/84
English