Garland CEPA 130 SBW Instruction Manual page 18

English
INDEX
1. Introduction
2. Security precautions and normative
3. Warning symbols
4. Machine description
5. Star up instructions
6. Machine usage
7. Maintenance and service
8. Troubleshooting
9. Transport
10. Storage
11. Equipment destruction /
recycling information
12. Warranty conditions
Declaration of conformity
TRANSLATION OF THE ORIGINAL MANUAL
Ref.:MTJCEPA130SBWV20M0420
PUBLICATION DATE: 04/13/2020
REVISION DATE: 18/02/2021
1. INTRODUCTION
18 Thank you for choosing this Garland machine. We
are sure that you will appreciate the quality and
19 performance of this machine, which will facilitate
your task for a long period of time. Remember that
23 this machine has the most extensive and expert
technical assistance network that you can go to for
24 the maintenance of your machine, troubleshooting and
purchase of spare parts and / or accessories.
26
ATTENTION! Read all safety warnings and
27 all instructions. Failure to observe all of the
warnings and instructions listed below can result in
28 electric shock, fire, and / or serious injury.
30 Only cut wood branches. Do not use this machine
for any other purposes not intended. For example:
31
do not use this machine to cut plastic, brick or metal
materials. Using this machine for operations other
31 than those intended may cause dangerous situations.
Save all warnings and instructions for future
31 reference. If you sell this machine in the future,
remember to give this manual to the new owner.
32
The term "machine" in the warnings refers to this
33 electrical machine with the battery connected. The
term switch in the "open" position means switch
disconnected and the switch in the "closed" position
means switch connected.
Remember that the user is responsible for accidents
and damages caused to himself, third parties and
things. The manufacturer will not be liable under any
circumstances for damage caused by improper or
incorrect use of this machine.
18/84