System Connector (X2002); Uem (D2200) - Nokia RM-94 Disassembly/Reassembly Instructions
Hide thumbs
Also See for RM-94:
- Rf troubleshooting instructions (48 pages) ,
- Service software and tuning instructions (68 pages)
Table of Contents
Advertisement
RM-94
5 - Disassembly/Reassembly Instructions
System connector (X2002)
There are also some marks introduced (bars) in order to help placing the system connector and
checking placement after rework. The placement bars need to be visible (they can be partly
hidden by the connector), but the connector must equally hide them in order to be parallel to
the PWB. In addition, the connectors must meet their pads properly as well.
UEM (D2200)
There are also corner marks introduced in order to help checking placement after rework.
Issue 1 04/2005
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
Nokia Customer Care
17
Advertisement
Table of Contents
