CCS Technical Documentation
Apply a signal with a frequency of
EGSM : 942.467 MHz (channel 37 + 67.710kHz offset)
GSM1800: 1842.867 MHz (channel 700 + 67.710kHz offset)
GSM1900: 1960.067 MHz (channel 661 + 67.710kHz offset)
and a power level of -80dBm to the RF-connector (remember to compensate for cable
attenuation).
In RSSI reading click on Read now.
Measuring RX performance using SNR measurement
Start Phoenix Service Software
Open the FBUS connection
Select
Wait until phone information is shown in the lower right corner of the screen.
Set operating mode to local mode
Select
Wait until the RF Controls window pops up
Issue 1 09/2003
Company Confidential
Scan Product Ctrl-R
Testing
alt-S
RF Controls
R
Copyright 2003 Nokia Corporation
Company Confidential
NEM-4
RF Troubleshooting
Page 6(b)-63