Nokia NEM-4 Series Disassembly Instructions Manual
Hide thumbs
Also See for NEM-4 Series:
- Troubleshooting instructions (138 pages) ,
- Service tools (22 pages)
Related Manuals for Nokia NEM-4 Series
Summary of Contents for Nokia NEM-4 Series
- Page 1 Customer Care Solutions NEM-4 Series Cellular Phones 5 - Disassembly Instructions Copyright 2003 Nokia Corporation. Issue 1 09/2003 Page 5-1 Company Confidential...
- Page 2 NEM-4 Company Confidential 5 - Disassembly Instructions CCS Technical Documentation Table of Contents Page No Disassembly instructions....................3 Assembly instructions ....................6 NEM-4 Dome Sheet Exchange ..................7 Copyright 2003 Nokia Corporation. Page 5-2 Issue 1 09/2003 Company Confidential...
- Page 3 For assembly, take reverse order and torque of 26Ncm. Press down the PWB with fingers. Remove UI-Shield. Open LCD Module’s connector carefully with tweezers and remove LCD Module. Copyright 2003 Nokia Corporation. Issue 1 09/2003 Page 5-3 Company Confidential...
- Page 4 Remove Microphone from Chassis with Torx. Put Torx hole Remove DC Connector from Chassis with Torx. behind Microphone and push carefully. Put Torx under the DC Connector (1) and bend (2). Copyright 2003 Nokia Corporation. Page 5-4 Issue 1 09/2003 Company Confidential...
- Page 5 Remove Power Key with tweezers. Remove Release Button with screwdriver from Chassis. Release Button is locked by small notch. Bend the chassis near the notch in order to release it. Copyright 2003 Nokia Corporation. Issue 1 09/2003 Page 5-5 Company Confidential...
- Page 6 Replace damaged or loose silicon gasket with a spare part loose silicon gasket must be replaced with a spare part gasket. gasket. Fix the gasket carefully with tweezers in chassis. Copyright 2003 Nokia Corporation. Page 5-6 Issue 1 09/2003...
- Page 7 Clean the pads on the PWB Module with a clean cloth if Put the new Dome Sheet onto the Dome Sheet necessary. Be carefully not damage the components on Assembly Jig. Mind the guiding pins. the PWB. Copyright 2003 Nokia Corporation. Issue 1 09/2003 Page 5-7 Company Confidential...
- Page 8 Finally check that the holes of Dome Sheet are centered pins are positioned correctly. Do not touch the spring to the PWB module holes. Ensure also, that there are no contacts. bubbles in Dome Sheet film. Copyright 2003 Nokia Corporation. Page 5-8 Issue 1 09/2003 Company Confidential...