The nominal supply voltage for MJS-80 is +6.0 V. The supply voltage must not exceed +12.0 V (min 5V). (MJS-80 has overvoltage protection) For flashing with FPS-8 it is possible to bypass regulator (jumper). Copyright 2003 Nokia Corporation. Page 6(b)-4 Issue 1 09/2003 Company Confidential...
The Soldering Jig RJ-10 is used for soldering and as a rework jig for system module. Product Code RJ-10 Module Jig: 0770542 View of RJ-10 Figure 3: RJ-10 Copyright 2003 Nokia Corporation. Issue 1 09/2003 Page 6(b)-5 Company Confidential...
Page 8
NEM-4 Company Confidential RF Troubleshooting CCS Technical Documentation Copyright 2003 Nokia Corporation. Page 6(b)-6 Issue 1 09/2003 Company Confidential...
Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-7...
Page 10
2 Once the best fit location has been found, leave the PA there and put stencil on top of the jig and PA. 3 Put soldering paste on the PA properly. 4 Remove stencil and the PA from the jig. 5 Start soldering process. Copyright 2003 Nokia Corporation Page 1-8 Issue 1 09/2003 Company Confidential...
Part list Table 2: Part Material Name of Part Drawing number number code Frame SME5S910 Cylindrical pin 3x12 640b003 Cylindrical pin 2x12 640B012 Type label 9380601 Exploded view Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-9 Company Confidential...
ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A out- put. Product Code ACF-8 Universal Power Supply: 0680032 View of ACF-8 Figure 3: Picture will be added here later. Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-11 Company Confidential...
FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage to FLA-41 adapter. Product Code FLC-2 DC Cable: 0730185 View of FLC-2 Figure 5: FLC-2 Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-13 Company Confidential...
Figure 6: AXS-4 XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4S to FLA-41. Product code XCS-1 Service Cable: 0730218 View of XCS-1 Figure 7: XCS-1 Copyright 2003 Nokia Corporation Page 1-14 Issue 1 09/2003 Company Confidential...
FLS–4S is a dongle and flash device incorporated into one package, developed specifi- cally for POS use. Product Code FPS-4S Sales Pack – Europe/Africa 0080541 FPS-4S Sales Pack –APAC 0080542 FPS-4S Sales Pack –Americas 0080543 View of FPS-4S Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-15 Company Confidential...
RF cable XRF-1 is used to connect e.g. MJS-80, CPL-5, TDS-10 or RA7 to RF measure- ment equipment. XRS-6 RF Cable can also be used. Product code XRF-1 RF Cable: 0730085 XRS-6 RF Cable: 0730231 View of XRF-1 Figure 10: XRF-1 Copyright 2003 Nokia Corporation Page 1-16 Issue 1 09/2003 Company Confidential...
Figure 11: XRS-4 XRS-11 RF Cable The XRS-11 RF Cable is used for tuning with the MJS-80. Product code XRS-11 RF Cable 0730265 View of XRS-11 Figure 12: XRS-11 Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-17 Company Confidential...
The DC Cable CA-5S is used to connect e.g. JBV-1 to the phone. SCB-3 DC Cable can also be used. Product Code CA-5S DC Cable: 0730283 SCB-3 DC Cable: 0730114 View of SCB-3 Figure 14: SCB-3 Copyright 2003 Nokia Corporation Page 1-18 Issue 1 09/2003 Company Confidential...
Figure 15: XCS-4 DA-10DS Printer Cable This cable is used to connect the PC to FPS-8. Product code DA-10DS Printer Cable: 0730298 View of Printer Cable Figure 16: DA-10DS Copyright 2003 Nokia Corporation Issue 1 09/2003 Page 1-19 Company Confidential...
The SS-17 Dome Sheet Assembly Jig is used when new Dome Sheets need to be assem- bled. Product code SS-17 Dome Sheet Assembly Jig 0770773 View of SS-17 Figure 17: SS-17 Copyright 2003 Nokia Corporation Page 1-20 Issue 1 09/2003 Company Confidential...